Process
The medicament is conveyed through the system in a specific manner with the curling edge positioned at the top and cone head cap positioned at the bottom. The rubber stopper and curling edge quality are checked while being transported through the auger. Next, the medicament is rotated 180° to position the cone head cap at the top and conveyed to the bottle feeding dial, where a cone head cap is placed and detected by three cameras positioned at 120° intervals. Upon passing through the quality inspection station, the medicament is inspected and rotated to ensure a full 360° inspection. Moving forward, the medicament passes through foreign body detection stations to detect any foreign objects or liquid levels. Upon leaving the bottle, the medicament is turned 180° using the bottle out auger and fence to position the cone head cap downward and proceed through the separation process. Any defective bottles are rejected on the bottle dial.
Characteristic
1. Full servo drive, high running precision;
2. The servo bottle and brake are used, without mechanical wear; the rotation start angle and stop angle can be set according to the formula.
3. 60 screw bottle heads, divided into 20 groups, three in each group, each group is driven by a servo motor;
4. The patented bottle clamping method is adopted to ensure that the medicine bottle is well centered and the bottle will not produce air bubbles.
5. The waste is removed by vacuum suction, which is divided into three channels, and the qualified and unqualified products are in different directions to prevent confusion.
6. Equipped with 17 German basler cameras and 2 Advantech industrial computers.
7. The reducer matched with the servo motor adopts the planetary reducer, which has high running accuracy and is maintenance-free.
Security system
The equipment is outfitted with a cutting-edge ozone catalytic and emission device.
Located at both the front and rear of the machine are emergency stop switches.
Additionally, the entirety of the equipment is encompassed by an anti-electromagnetic radiation film for added safety.
This equipment has built-in overload protection and automatically shuts off when abnormal work is detected. Furthermore, there is an automatic stop function that is activated when the door is opened.
Lastly, both the orbital water droplets and electro-acupuncture water droplets will cease operation and power down automatically.
